In case of exchange the injection pump, should fill the engine oil in the governor of the injection pump before the engine running. P222LE / PU222TI 1.3 liter 3.3.24. Injection timing z How to check the injection timing Check the current injection timing of the engine as follows before adjusting it but if the injection timing is wrong should do it. (1) Remove the plug screw assembled in case cover on the injection pump drive gear.(Some cases are needed to remove cover assembly) And turn the crank pulley so that the mark on pointer provided on EA6O6002 injection pump coincides with matching mark (FB) on the flange surface of the drive gear.
(2) Check the injection timing degree whether the V-type edge of the flywheel housing sight hole coincides with the engine injection timing degree marked on the flywheel corresponding to fuel delivery position. EA6O6004 15 0 Engine Reassembly - 93 - P158LE / PU158TI P180LE / PU180TI 0.95 liter 1.1 liter FB Pointer Flange