C8.3 Commercial Marine and Ind [...] All Engines International Industrial (Off-Highway) Section W - Warranty Page W-11 Maximum sulfur levels by emissions certification level as listed on the Engine's dataplate are: EPA 2007/2010/2013 max. 15 parts per million EPA Tier 4 Interim / Final max. 15 parts per million EU Stage IIIB 2011 max. 15 parts per million Euro 4/5 max. 50 parts per million Euro 6 max. 10 parts per million Cummins is not responsible for failures or damage resulting from what Cummins determines to be abuse or neglect, including, but not limited to:
operation without adequate coolants or lubricants; overfueling; overspeeding; lack of maintenance of lubricating, cooling or intake systems; improper storage, starting, warm-up, run-in or shutdown practices; unauthorized modifications of the Engine. Cummins is also not responsible for failures caused by incorrect oil, fuel or diesel exhaust fluid or by water, dirt or other contaminants in the fuel, oil or diesel exhaust fluid. For power units and fire pumps (package units) the Warranty applies to accessories, except for clutches and filters supplied by Cummins which bear the name of another company.
Except for the accessories noted previously, Cummins does not warrant accessories which bear the name of another company. Such non-warranted accessories include, but are not limited to: alternators, starters, fans*, air conditioning compressors, clutches, filters, transmissions, torque converters, steering pumps, non-Cummins fan drives and air cleaners. Cummins Compusave units are covered by a separate Warranty. Before a claim for excessive oil consumption will be considered, Owner must submit adequate documentation to show that consumption exceeds Cummins published standards.
Failures of belts and hoses supplied by Cummins are not covered beyond the first 500 hours or one year of operation, whichever occurs first.