OPERATION 13.2 LOADING PRECAUTIONS After loading the machine in the specified position, secure it in the place as follows. 1. Lower the work equipment slowly. 2. Apply the safety lock to lock all the control levers securely. 3. Turn the starting switch to the OFF position and stop the engine. Remove the key from the starting switch. 4. Lock the front and rear frame with the safety bar. 5. Put the blocks in front of and behind the wheels. Secure the machine with chains or rope to prevent the machine from moving during transportation. 6. Always retract the cab radio antenna fully.
13.3 LIFTING THE MACHINE WARNING If the wire rope is not fitted correctly while lifting the machine, it may fall and cause serious injury or death. Raise the machine 100-200 mm (3.9 - 7.9 in.) from the ground. After checking that the machine is horizontal and no slack exists in the wire rope, continue lifting the machine. Before lifting the machine, always stop the engine and lock the brakes. A qualified crane operator must perform all lifting operations. Never raise the machine with any worker on it. Always ensure that the wire rope used for lifting the machine is ample strength for the weight of the machine.
Never try to lift the machine at a position other than the one specified on the next page. WA450-3MC 2-78