MAINTENANCE 24.6.7 LUBRICATING WARNING Set the work equipment in a stable condition and turn the machine off. Apply the lock for the work equipment control levers. Apply the parking brake and lock the front and rear frames with the safety bar and pin. 1. Use a grease pump to grease the fittings, which are identified by the arrows in the illustration below. 2. After greasing, wipe off the old grease that was pushed out. 1. Bucket pin (2 places) 2. Bucket link pin (2 places) 3. Dump cylinder pin (2 places) 4. Lift cylinder pin (4 places) 5. Lift arm pivot pin (2 places) 6. Tilt lever pin (1 place) 7. Steering cylinder pin (4 places) WA450-3MC 3-46