MAINTENANCE 3. After removing the bolts (2) and the cover (3), remove the strainer (4). 4. Remove all dirt from the strainer (4) before washing it in clean, light oil (diesel or flushing oil). Replace the strainer if it is torn. 5. Replace the O-ring in the cover with a new one. Reinstall the strainer (4) to the cover (3). Tighten the bolts (2) to: 107.9 +/- 14.7 N•m (79.6 +/- 10.8 lbf ft.) 6. Pour in the specified amount of oil at the oil filler (F). For details of the oil to use and refill capacity, see 20 FUEL, COOLANT AND LUBRICANTS ACCORDING TO AMBIENT TEMPERATURE on page 3-9. 7. After filling the transmission with oil, check the transmission oil level. 8.
Check for oil leaks a the transmission case and filter. 24.8.2 CLEAN TRANSMISSION CASE BREATHER Remove all mud and dirt from around the breather. Remove the breather and put it into a cleaning fluid to clean. Take care, so as not to let any dust or dirt get into the transmission case through the port while the breather is removed. WA450-3MC 3-51