OPTIONS, ATTACHMENTS 6. RADIO BAND SELECTOR (BAND) Radio operation: Press this button to change the radio band (FM1, FM2, AM, Weather Band). Cassette operation: Press this button to manually change the cassette from Side One to Side Two. 7, 8. UP, DOWN TUNING/SEEK TUNING/CASSETTE FAST FORWARD AND REWIND To manually select a radio station, momentarily press the “UP” tuning button (7) to advance the tuning and display one digit higher, or the “DN” tuning button to tune one digit lower. Continue tapping the desired button to change to the desired station.
To automatically “seek” the station nearest the one being received, press the UP button (7) to seek upward or the the DN button (8) to seek downward. Hold the button until a “beep” is heard. Release the button and the radio tuning will stop at the next broadcasting station. During cassette operation, the UP and DN buttons actuate the fast forward and rewind functions, respectively, regardless of which side of the cassette is being played. Press and release to start the rewind or fast forward; press again to halt the function. 9. RADIO, TIME/RADIO, TAPE SELECTOR (R/T) This displays the frequency, time, and operation modes.
Pushing a cassette tape into the player automatically engages the tape mode. Operation (tape playing): Tap the R/T button to pause the cassette and operate the radio; tap the R/T button again to display the frequency for five seconds; press the button until a “beep” is heard and then release to resume cassette play. Operation (radio playing): The time is displayed until the radio frequency is changed or this button is pressed, causing the radio frequency being received is displayed for five seconds. NOTE: If a cassette is in the player, a small cassette symbol appears on the LCD display. Leaving cassettes in the player for extended periods (overnight) can cause damage. 10.
PRESET RADIO STATION MEMORIES To set any of the five memories in each band: A. Turn on the system and select the band. B. Select the first station to be preset with the UP and DN tuning controls (7) and (8). C. Press the desired preset button (1 through 5) and hold it until a “beep” is heard. D. Release the button. The display will show “CH1", “CH2" etc., depending on which button was set. Press the desired preset button to tune to the station in the memory. WA450-3MC 5-13