OPTIONS, ATTACHMENTS 31.8 SETTING TIME ON CLOCK The load meter has a built-in clock. It provides the date and time when the data is printed. To adjust the date and time: Check that the green LED (1) of the SUBTOTAL display is flashing. Press the MODE switch (2) and ADJ switch (3) simultaneously for 3 seconds to switch to the clock mode. In the clock mode, the dash will be flashing. Press the ADJ switch (3). The digit at the extreme right will be flashing, indicating that the clock can now be adjusted. To increase the flashing digit in increments of one, press the INC switch (4). To adjust the next digit to the left, press the SFT switch (5).
When the left digit of the hour setting flashes, the display will change to the month/day setting. When the left digit of the month setting flashes, the display will change to the year setting. After setting the year, the display will revert to the time. Press the ADJ switch (3) to complete the setting. Press the MODE switch (2) to revert to the SUBTOTAL mode. WA450-3MC 5-26