OPERATION 4. REAR WORKING LAMP SWITCH WARNING Always turn the working lamp off before traveling on public roads. When turning on the rear working lamp, turn the lamp switch to the ON position for the side clearance lamp, or the ON position for the head lamp. When the pilot lamp is pressed, it will light up and come ON. If the pilot light is pressed again, the pilot lamp will go out and the working lamp will be turned OFF. The working lamp will not light up if the lamp switch is not at the ON position for the side clearance lamp, or the ON position for the head lamp. 5. TRANSMISSION SELECTOR SWITCH This switch determines whether the manual or auto-shift mode is selected.
Depressing the switch once sets the manual transmission mode (on position) and the lamp is lit. Depressing the switch again selects the off position or the auto-shift mode and the lamp is off. 6. LAMP SWITCH/TURN SIGNAL LEVER/DIMMER This lever performs three functions. LAMP SWITCH The lamp switch turns on the head lamps, side clearance lamps, tail lamps, and instrument panel lighting. position 1: OFF position 2: Side clearance lamp, tail lamps, and gauge lighting light up position 3: Head lamps light up in addition to lamps at the (2) position REMARKS The lamp switch can be operated, regardless of the position of the lever. WA450-3MC 2-17