OPERATION 7. BRAKE PEDALS WARNING When traveling downhill, use the engine as a brake and always use the right brake pedal. Do not use the brake pedals repeatedly, unless necessary. Do not put your foot on this pedal, unless necessary. Right brake pedal The right brake pedal operates the wheel brakes and used for normal braking. Left brake pedal The left brake pedal operates the wheel brakes. If the transmission cut-off switch is on, it also returns the transmission to neutral. If the transmission cut-off switch is off, the left brake pedal acts in the same way as the right brake pedal.
REMARKS When the accelerator is used for operating the work equipment, always use the left brake pedal to slow or stop the machine after placing the transmission cut-off switch to the on position. 8. ACCELERATOR PEDAL This pedal controls the engine speed and output. The engine speed can be freely controlled between low idle and full speed. 11.4 STEERING COLUMN TILT LEVER WARNING Stop the machine before adjusting the steering wheel angle. This lever allows the steering column to tilt forward or backward. Pull the lever up and move the steering wheel to the desired position. Then push the lever down to lock the steering wheel in position. Range of adjustment:
125 mm (4.92 in.) (stepless) WA450-3MC 2-28