OPERATION 11.5 CAP WITH LOCK The fuel tank filler port and the hydraulic tank filler port are equipped with locks. Use the starter key to open and close the cap as follows: 11.5.1 METHOD OF OPENING AND CLOSING THE CAP WITH LOCK TO OPEN THE CAP (fuel tank filler port) 1. Insert the key into the cap. Ensure that the key is fully inserted or the key could break. 2. Turn the key clockwise and align the mark on the cap with the rotor groove. Remove the cap. TO LOCK THE CAP 1. Turn the cap into place. 2. Turn the key clockwise and take the key out. TO OPEN THE CAP (hydraulic tank filler port) 1. Insert the key into the cap as far as the key will go.
If it is turned before inserting it all the way, the key could break. 2. Turn the key slowly counterclockwise and align the rotor groove with the mark on the cap until a clicking sound is heard. TO LOCK THE CAP (hydraulic tank filler port) 1. Insert the key into the cap as far as the key will go. If it is turned before inserting it all the way, the key could break. 2. Turn the key slowly counterclockwise and align the rotor groove with the mark on the cap until a clicking sound is heard. WA450-3MC 2-29