TROUBLESHOOTING 3.15 TROUBLESHOOTING 3.15.2 AFTER THE FUEL HAS RUN OUT Before starting the engine, when the fuel has run out and therefore air has entered the fuel supply circuit, it is necessary to bleed the fuel supply circuit. For the necessary operations, see “4.7.8 MAINTENANCE EVERY 500 HOURS OF OPERATION”. 135 3.15.1 HOW TO REMOVE THE MACHINE DANGER • When removing the machine, use a wire rope suitable for the weight of the machine to be removed. DANGER • When removing the machine, use a wire rope suitable for the weight of the machine to be removed.
If the machine gets stuck in mud and cannot get out using only its motive power, or in case of breakdown, use a wire rope as shown in the figures on the right. RWA30610 RWA30610 IMPORTANT • Before recovering the machine, shift the gear lever to neu- tral and disengage the four-wheel drive. RWA30620 RWA30620