Operation - Section 32 OM3223 Page 32-2 Operator Cab and Controls Steering wheel (1, Figure 32-2) will telescope in and out and adjust through a tilt angle to provide a com- fortable wheel position for most operators. STEERING WHEEL AND CONTROLS Multi-Function Turn Signal Switch Horn Button Horn (2, Figure 32-2) is actuated by pushing the but- ton in the center of the steering wheel. Operation of the horn is to be verified before moving the truck. Observe all local safety rules regarding the use of the horn as a warning signal device before starting engine and moving the vehicle. FIGURE 32-3.
MULTI-FUNCTION TURN SIGNAL SWITCH Multi-function turn signal switch (4, Figure 32-2) is used to activate the turn signal lights, the windshield wipers, and to select either high or low beam head- lights. TIilt / Telescope Lever The steering column can be telescoped or the wheel tilted with tilt/telescope lever (3, Figure 32-2). Turn Signal Operation Move the lever upward to signal a turn to the right. Adjust the tilt of the steering wheel by pulling the le- ver toward the steering wheel and moving the wheel to the desired angle. Releasing the lever will lock the wheel in the desired location.
An indicator in the top, center of the instrument panel will illuminate to indicate turn direction selected. Refer to Instrument Panel and Indicator Lights in this section. Adjust the telescope function by pushing the lever forward to unlock. After positioning as desired, re- lease the lever to lock position. Move the lever downward to signal a turn to the left. NOTE: The turn signal will not automatically stop after a turn has been completed. High Beam Headlight Operation Moving the lever inward toward the rear of the cab changes the headlights to high beam. When the high beams are selected, the indicator in the top, center of the instrument panel will illuminate.
Moving the switch back to the original position will return the headlights to low beam. Windshield Wiper Operation Windshield wipers off Intermittent - Long Delay FIGURE 32-2. STEERING WHEEL AND CONTROLS Intermittent - Medium Delay Intermittent - Short Delay 1.Steering Wheel 2.Horn 3.Tilt Adjustment 4.Multi-Function Turn Signal Low Speed High Speed Depressing the button at the end of the lever will activate the windshield washer.