OM3223 Operation - Section 32 Operator Cab and Controls Page 32-9 Download Ports and Connectors Download ports and connectors are located inside the center console and are illustrated in Figure 32-7. Payload Meter Payload meter (1, Figure 32-7) and download con- nector (2) are used to provide management with operational data such as tonnage hauled and cycle times. Engine Diagnostics Port Engine diagnostics port (12) is used by qualified per- sonnel to access engine diagnostic information. Refer to Section 6 Optional Equipment, for a more complete description of the payload meter and its functions.
Komatsu Engine CENSE Connector Payload Meter Download Connector CENSE Connector (13) is a three-pin connector is for use by qualified personnel to access engine diagnos- tic information for the CENSE system. Refer to the engine manufacturer’s service publications for trou- bleshooting information. Payload meter download connector (2, Figure 32-9) is used with a special cable to allow the payload meter (1) to communicate with a portable computer. Statex III Downlad Port Statex III download port (14) is for use by qualified personnel to access G.E. STATEX III electric propul- sion diagnostic information and data.
Modular Mining Port (Optional) Modular mining port location is used if the optional Modular Mining System is installed on the truck. Centry™ Fuel Control Diagnostics Download Port (Optional) Diagnostics download port is for use by qualified per- sonnel to access the Centry™ fuel control system diagnostic information. FIGURE 32-9. PAYLOAD METER 1. Payload Meter 2. Download Connector