DBC 130(F30i Series) DBC130ALE2A 2. Cycle Alarm 2.1 2031 Return to Ref. Point in Manual 1) Description A message prompting you to manually return the axis to the reference point 2) Cause of problem ① The machine was instructed to operate before all axes had returned to their respective reference point. ② In the Machine Lock state, AUTO mode (EDIT, MEMORY, TAPE, MDI) was selected. (X, Y, Z, W) ③ In the Machine Lock state, EDIT or MEMORY mode was selected. (B, 6 axes) 3) Action ① Return to the reference point manually ② If you want to operate the machine regardless of whether the axes return to their reference point, set "Keep Relay K1.6" to 1.
③ In the Machine Lock state, the machine can be instructed to operate in AUTO mode only after the axes have returned to their respective reference point. Return to Ref. Point Manually Ref. Point Return Interlock. Alarm 21