Torque Values 00 03 Check Oil Lines And Fittings 8 CAUTION: To avoid injury from escaping fluid under pressure, stop engine, and relieve the pressure in the system before disconnecting hydraulic or other lines. Tighten all connections before applying pressure. X9811 –UN–23AUG88 Check all oil lines, hoses, and fittings regularly for leaks or damage. Make sure all clamps are in position and tight. Make sure hoses are not twisted or touching moving machine parts. If abrasion or wear occurs, replace immediately. Tubing with dents may cause the oil to overheat. If you find tubing with dents, install new tubing immediately. IMPORTANT: Tighten fittings as specified in torque chart.
T85401 –UN–24JAN89 When you tighten connections, use two wrenches to prevent bending or breaking tubing and fittings. TX,90,DH1559 –19–20FEB97–1/1 TM1859 (14JUL04) 00-03-8 700H Crawler Dozer 071404 PN=32