Torque Values TM1859 (14JUL04) 00-03-9 700H Crawler Dozer 071404 PN=33 O-Ring Groove Connections Face seal grooves (2 and 4) on fittings (3) should be identified before the O-ring (1) is installed into the fitting (use a O-ring pick to feel for the dovetail edge). Applying petroleum jelly on an O-ring to install it in a Standard Groove is appropriate. However, do not use petroleum jelly or grease on an O-ring to install it into a Half Dovetail Groove (Captive O-ring Groove). If petroleum jelly is used in a Half Dovetail groove, the jelly could push the O-ring out of the groove before the fitting is tighten.
1—O-Ring 2—Half Dovetail Groove 3—Fitting 4—Standard Groove –UN–31JAN00 T127838 Face Seal Groves CED,TX03768,2691 –19–01FEB00–1/1 00 03 9