CAUTION Do not allow fabric pieces and dust to collect in the foot controller. Doing so could cause a fire or an electric shock. 1. Turn the power off and plug the foot controller plug into the jack on the back of the machine. * The foot controller can not be used during machine em- broidery. 1 Foot controller 2 Foot controller jack 2. When the foot controller is depressed lightly, the machine will run at a low speed. * The speed selected by the speed control lever on the body of the machine will be the maximum speed of the foot con- troller. 1 Faster 3. When pressure on the foot controller is released, the machine will stop.
* When the foot controller is being used, the “START/STOP” button has no effect on the sewing. Note (For U.S.A. only) Foot controller: Mxodel N5V This foot controller can be used for sewing machine model PE- 300S/PE-400D. 23 STARTING AND STOPPING SEWING “START/STOP” button bric under the presser foot, lower the presser foot, ess the “START/STOP” button. The sewing ma- sewing. peed by sliding the speed control lever. continues at low speed while the button is pressed. ess it once more to stop the machine. Foot controller 1 2 1