2) Select the corresponding battery type and press [ENTER / PRINT] . The specific battery type is usually listed on the battery label. Figure 4.1.2 3) Select the corresponding battery standard and press [ENTER / PRINT] . The specific battery standard will also be listed on the battery label. SELECT STANDARD CCA JIS IEC SAE BCI DIN EN GB MCA CA Figure 4.1.3 Please refer to the following table for specific battery standards and test ranges. EN I 14 BATTERY TYPE REGULAR FLOODED AGM GEL EFB EXIT ENTER EXIT ENTER Measurement Standard Description Measurement Range CCA Cold Cranking Amps, specifeid by SAE & BCI, most frequently used value for starting battery at 0°F(-18°C) 100-2000