C2SBM-Q User's Manual Default Primary Video Adapter This feature allows the user to select the video device used by the BIOS during POST. If set to Auto , PEG, PCI, IGD (Internal Graphics Device) devices will be selected. If set to IGD (Internal Graphics Device), IGD and PCI devices will be selected. If set to PEG, PEG and PCI devices will be selected. If set to PCI, PCI, PEG and IGD devices will be selected. IGD-Device 2 This feature allows the user to enable or disable Internal Graphics Device#2 by entering a specified value. IGD-Device 2, Function 1 This feature allows the user to enable or disable Function#1 of Internal Graphics Device#2 by entering a specified value.
DVMT 4.0 Mode This feature allows the user to configure the DVMT 4.0 Graphics Memory to be used by the Internal Graphics Device. The options are Fixed, DVMT and Auto. Pre-allocated Memory Size This feature allows the user to set the total amount of Pre-allocated graphics memory to be used by the Internal Graphics Device. The options are 1 MB and 8 MB. IGD Memory Size This feature allows the user to set the total amount of graphics memory to be used by the Internal Graphics Device. The settings are 128 MB, 256 MB and MAXDVMT. Fixed Graphics Memory This feature allows the user to display the Fixed Graphics settings.
DVMT Graphics Memory This feature allows the user to display the DVMT Graphics settings. Azalia Audio Select Auto to enable Azalia Audio. The settings are Auto and Disabled. Route Port 80h Cycles to This feature allows the user to decide which bus to send debug information to. The options are Disabled, PCI and LPC. 4-12