Top Control 2 9 BEFORE USE 1 10 11 4 5 6 7 3 8 1 POWER button (P27, 45) Turns the projector on or off. 7 AUTO PC button (P29) When ANALOG RGB-1 or ANALOG RGB-2 is selected, performs the auto PC adjustment to adjust the tracking, total number of dots, and image position automatically. 2 KEYSTONE button (P31) Corrects keystone distortion. 3 MENU button (P50) Displays a menu. 8 OK button (P51) Determines the item selected from the menu. 4 COMPUTER-1 button (P28, 46) Selects the image input from the DVI-I/RGB IN-1 terminal. Pressing this button continuously allows you to select an input signal (DIGITAL RGB or ANALOG RGB-1).
9 POINTER button (P50) Selects the upper, lower, left, or right item in the menu. The left and right buttons are also used as volume control buttons. 10POWER indicator (P27) Indicates the projector status. When stays red: The projector can be turned on. When flashing red: The projector is being turned off (the lamp is being cooled). When stays green: The projector is on. When flashing green: The projector is being turned on. 5 COMPUTER-2 button (P28, 46) Selects the image input from the RGB IN-2/ COMPONENT IN/RGB OUT terminal. Pressing this button continuously allows you to select an input signal (ANALOG RGB-2 or COMPONENT).
6 VIDEO/S button (P46) Select the image input from the VIDEO IN terminal or S-VIDEO terminal. Pressing this button continuously allows you to select input signals (VIDEO or S-VIDEO). 11 WARNING lamp (P79) Flashes red when a problem has been detected. 18