Left side cover 1 Remove the following assemblies: Toner cartridge, media tray, and cable pod. See “Toner cartridge” on page 15 through “Cable pod” on page 17. 2 Open the toner cartridge door. 3 Remove the single left-cover retaining screw (callout 1). 4 Pull out on the rear of the cover and rotate it away from the printer. 1 Figure 7. Remove the left side cover Hint It might be necessary to release the left side cover-locking tab found under the printer. Hint The left-side retaining screw is slightly longer than similar screws used in the printer. Keep this screw separated from other screws while servicing the printer to avoid misplacing it.
18 Chapter 2 - Removal and replacement Q1342-90910