10 Remove the motor wire harness from the wire clip (callout 7). 11 Remove the three ECU PCB mounting screws (callout 8). 12 Remove the two power cord receptacle plate mounting screws (callout 9). 13 Lift the ECU PCB off of the ECU pan. 7 7 1 8 2 9 Figure 48. Remove the ECU PCB from the pan Note The ECU board is replaced as a single unit. Only soldered cables ship with the replacement board. If other cables are damaged during removal, you will have to order replacements. Q1342-90910 Bottom assemblies 59