Copy processor board 1 Squeeze the tabs on the bumpers (callout 1) and pull out to remove the bumpers. 2 Remove four screws (callout 2). CAUTION When removing or installing the copy processor board, do not drag the top of the board along the RFI fingers at the top of the slot. Doing so will damage the copy processor board components. 3 Gently pull the copy processor board out to remove it. 1 1 2 2 Figure 75. Copy processor board To reinstall Align the copy processor board with the rails and slide the board into the slot. When the board reaches the end of the slot, slightly angle the board, lifting the connector end, and push to engage. C8523-90921 External covers 111