Separation belt assembly Note The separation belt assembly is not a replaceable assembly. You must replace the necessary components of the assembly. 1 Remove the following covers: • ADF back cover. See page 107. • ADF front cover. See page 108. C8523-90921 Figure 177. 2 Remove four screws (callout 1) and lift off the separation belt assembly cover (c 1 2 Separation belt assembly (1 of 6) CAUTION Do not touch the retaining screws (callout 3) on the gap adjustment roller. This is a fa it cannot be adjusted in the field. Hint The retaining screws are marked with blue paint. 3 Figure 178.
Separation belt assembly (2 of 6) 180 Chapter 6 Removal and replacement Do not touch the retaining screws (callout 3) on the gap adjustmen