Chapter 6 Control Terminals CFP2000 6-1 Remove the Cover for Wiring Please remove the top cover before wiring the multi-function input and output terminals. NOTE The drive appearances shown in the figures are for reference only, a real drive may look different. Frame A & B Applicable models: VFD007FP4EA-41/-52/-52S, VFD015FP4EA-41/-52/-52S, VFD022FP4EA-41/-52/-52S, VFD037FP4EA-41/-52/-52S, VFD040FP4EA-41/-52/-52S, VFD055FP4EA-41/-52/-52S, VFD075FP4EA-41/-52/-52S, VFD110FP4EA-41/-52/-52S, VFD150FP4EA-41/-52/-52S, VFD185FP4EA-41/-52/-52S, VFD220FP4EA-41/-52/-52S Screw torque: 12–15 kg-cm / [10.4–13 lb-in.] / [1.2–1.5 Nm] 1) Remove the keypad.
(As shown in figure 6-7) 2) Loosen the screws and press the tabs on both sides to remove the cover. (As shown in figure 6-8) Figure 6-6 Figure 6-7 Figure 6-8 6-4