Chapter 3: System Interface 4-4 Drive Carrier LEDs The server chassis uses SATA drives. SATA Drives Green: Each Serial ATA drive carrier has a green LED. When illuminated, this green LED (on the front of the SATA drive carrier) indicates drive activity. A con- nection to the SATA backplane enables this LED to blink on and off when that particular drive is being accessed. Each SATA drive carrier has two LEDs. Red: The red LED to indicate an SATA drive failure. If one of the SATA drives fail, you should be notifi ed by your system management software. SCSI Drives This chassis does not support SCSI drives at this time. 3-3