Supermicro A+ Server 2021TM-BTRF/BIBXRF — Supermicro A+ Server 2021TM-BTRF/BIBXRF User Manual PDF

Chapter 5: Advanced Serverboard Setup Infi niBand Port Enable/Disable JIB1 enables or disables the Infi niBand port on the H8DMT/H8DMT-IBX Serverboards. The default position is on pins 1 and 2 to enable the port. See the table on the right for jumper settings. 5-11 Onboard Indicators LAN LEDs The Ethernet ports (located beside the VGA port) have two LEDs. On each port, the yellow LED fl ashes to indicate activity while the other LED may be green, amber or off to indicate the speed of the connection. See the table on the right for the functions associated with the connection speed LED. Onboard Power LED (DP4) An Onboard Power LED is located at DP4.

This LED Indicator is lit when the system is on. Be sure to unplug the power cable before removing or adding any components. See the table on the right for more details. IPMI Dedicated LAN LEDs IPMI LAN An additional IPMI Dedicated LAN is also above the external USB ports. The amber LED on the right indicates activity, while the green LED on the left indicates the speed of the connection. See the table at right for more information.

Link LED Activity LED 5-21 Infi niBand Port Enable/ Disable Jumper Settings (JIB1) Jumper Setting Defi nition Pins 1-2 Enabled (Default) Pins 2-3 Disabled JLAN1/2 LED (Connection Speed Indicator) LED Color Defi nition Off NC or 10 Mb/s Green 100 Mb/s Amber 1 Gb/s Onboard PWR LED Indicator (DP4) LED Color Defi nition Off System Off (PWR cable not connected) Green System On Green: Flashing Quickly ACPI S1 State Green: Flashing Slowly ACPI S3 (STR) State IPMI LAN Link LED (Left) & Activity LED (Right) LED Status Defi nition Link (Left) Green: Solid 100 Mbps Activity (Right) Amber: Blinking Active