A+ SERVER 2021TM-BTRF/BIBXRF User's Manual 6-8 Installing the Motherboard Figure 6-10: I/O Shield Placement I/O Shields I/O Shield The I/O shield holds the motherboard ports in place. The I/O shield does not require installation. Permanent and Optional Standoffs Standoffs prevent short circuits by securing space between the motherboard and the chassis surface. The SC827 chassis includes permanent standoffs in locations used by the motherboards. These standoffs accept the rounded Phillips head screws included in the SC827 accessories packaging. Some motherboards require additional screws for heatsinks, general components and/ or non-standard security.
Optional standoffs are used for these motherboards. To use an optional standoff, you must place a hexagon screw through the bottom the chassis and secure the screw with the hexagonal nut (rounded side up). Depending upon the confi guration of the motherboard being used, it is also possible that some of the optional standoffs which are pre-installed in the chassis, may need to be removed. 6-10