Chapter 7: BIOS Enable Clock to All Dimms Use this setting to enable unused clocks to all DIMMSs, even if some DIMM slots are unpopulated. Options are Enabled and Disabled . Mem Clk Tristate C3/ALTVID Use this setting to Enable or Disable memory clock tristate during C3 and ALT VID. Options are Enabled and Disabled . Memory Hole Remapping When Enabled, this feature enables hardware memory remapping around the memory hole. Options are Enabled and Disabled. CS Sparing This setting will reserve a spare memory rank in each node when enabled. Options are Enabled and Disabled . DCT Unganged Mode This setting enables unganged DRAM mode (64-bit).
Options are Auto (ganged mode) and Always (unganged mode). Power Down Enable This setting enables or disables the DDR power down mode. Options are Enabled and Disabled. Power Down Mode This sets the power down mode. Options are Channel and Chip Select. X ECC Confi guration ECC Mode This setting affects the DRAM scrub rate based on its setting. Options are Disabled, Basic , Good, Super, Max and User. Depending upon the setting chosen, some or all of the following settings will become active: DRAM ECC Enable DRAM ECC allows hardware to report and correct memory errors automati- cally. Options are Enabled and Disabled. 7-9