Paper Loading A sheet of paper is already in the printer to protect the paper-out sensor during shipping. Remove it before loading any paper. If you ship the printer or move it long distances, put in another sheet. Now put a sheet of paper in your MPS 1000 so you can test it. Figure 1- 7 shows the names of the parts you need to know. Paper feed knob Figure 1- 7. MPS 1000 ready for paper loading 1. First, make sure the printer is turned OFF. Open the front lid, push the friction lever back, and pull the paper bail forward. 2. Then move the print head by hand to the center of the printer and feed the paper into the paper slot in the top of the printer. 3.
When the paper will not go any farther, turn the paper feed knob to advance it as you would a typewriter. 10