cisco — Configuring PPP Authentication Using AAA

What to do next The list-name is a character string used to name the list you are creating. The method argument refers to the actual method the authentication algorithm tries. The additional methods of authentication are used only if the previous method returns an error, not if it fails. To specify that the authentication should succeed even if all methods return an error, specify none as the final method in the command line. For example, to specify that authentication should succeed even if (in this example) the TACACS+ server returns an error, enter the following command:

Device(config)# aaa authentication login default group tacacs+ none Because the none keyword enables any user logging in to successfully authenticate, it should be used only as a backup method of authentication. Note To create a default list that is used when a named list is not specified in the login authentication command, use the default keyword followed by the methods that are to be used in default situations. The default method list is automatically applied to all interfaces. For example, to specify RADIUS as the default method for user authentication during login, enter the following command:

Device(config)# aaa authentication login default group radius Configuring PPP Authentication Using AAA The AAA security services facilitate a variety of authentication methods for use on serial interfaces running PPP. Use the aaa authentication ppp command to enable AAA authentication no matter which of the supported PPP authentication methods you decide to use. To configure AAA authentication methods for serial lines using PPP, use the following commands in global configuration mode: Procedure Configuring Authentication Configuring PPP Authentication Using AAA Command or Action Purpose Step 6 login authentication {default | list-name} Example:

Device(config-line)# login authentication default Applies the authentication list to a line or set of lines. Step 7 end Example: Device(config-line)# end Exits line configuration mode and returns to privileged EXEC mode. Command or Action Purpose Step 1 enable Example: Enables privileged EXEC mode. Enter your password, if prompted. Configuring Authentication 18