• A flow monitor cannot be shared across Layer 3 physical interfaces and logical interfaces (such as, Layer 3 port-channel interface, Layer 3 port-channel member, and switch virtual interface [SVI]), but a flow monitor can be shared across logical interfaces or Layer 3 physical interfaces. • When Flexible NetFlow and Network Address Translation (NAT) are configured on an interface, • Flexible NetFlow will display and export the actual flow details; but not the translated flow details. Application-level gateway (ALG) flow details are not part of the actual flow details that are exported.
• If the ALG traffic gets translated through the CPU, Flexible NetFlow will display and export the translated flow details for the ALG traffic. Information About Flexible NetFlow The following sections provide information about Flexible NetFlow. Flexible NetFlow Overview Flexible NetFlow uses flows to provide statistics for accounting, network monitoring, and network planning. A flow is a unidirectional stream of packets that arrives on a source interface and has the same values for the keys. A key is an identified value for a field within the packet. You create a flow using a flow record to define the unique keys for your flow.
The device supports the Flexible NetFlow feature that enables enhanced network anomalies and security detection. Flexible NetFlow allows you to define an optimal flow record for a particular application by selecting the keys from a large collection of predefined fields. All key values must match for the packet to count in a given flow. A flow might gather other fields of interest, depending on the export record version that you configure. Flows are stored in the Flexible NetFlow cache. You can export the data that Flexible NetFlow gathers for your flow by using an exporter and export this data to a remote system such as a Flexible NetFlow collector.
The Flexible NetFlow collector can use an IPv4 address. You define the size of the data that you want to collect for a flow using a monitor. The monitor combines the flow record and exporter with the Flexible NetFlow cache information. Starting with the Cisco IOS XE 16.12.1 release, Source Group Tag (SGT) and Destination Group Tag (DGT) fields over Flexible NetFlow are supported for IPv6 traffic. Starting with the Cisco IOS XE Dublin 17.12.1 release, Flexible NetFlow Version 5 is supported. Original NetFlow and Benefits of Flexible NetFlow Flexible NetFlow allows the flow to be user defined. The benefits of Flexible NetFlow include:
• High-capacity flow recognition, including scalability and aggregation of flow information. • Enhanced flow infrastructure for security monitoring and dDoS detection and identification. • New information from packets to adapt flow information to a particular service or operation in the network. The flow information available will be customizable by Flexible NetFlow users. Configuring Flexible NetFlow Information About Flexible NetFlow Configuring Flexible NetFlow 4