cisco — Feature History for Multi-VRF CE

Device(config-if)#exit Device(config)#interface gigabitethernet1/1/0.20 Device(config-if)#encapsulation dot1q 20 Device(config-if)#ip vrf forwarding v2 Device(config-if)#ip address 83.0.0.3 255.255.255.0 Device(config-if)#exit Device(config)#router bgp 100 Device(config-router)#address-family ipv4 vrf v2 Device(config-router-af)#neighbor 83.0.0.8 remote-as 800 Device(config-router-af)#neighbor 83.0.0.8 activate Device(config-router-af)#network 3.3.2.0 mask 255.255.255.0 Device(config-router-af)#exit Device(config-router)#address-family ipv4 vrf vl Device(config-router-af)#neighbor 38.0.0.8 remote-as 800 Device(config-router-af)#neighbor 38.0.0.8 activate Device(config-router-af)#network 3.3.1.0 mask 255.255.255.0 Device(config-router-af)#end Feature History for Multi-VRF CE This table provides release and related information for the features explained in this module.

These features are available in all the releases subsequent to the one they were introduced in, unless noted otherwise. Use the Cisco Feature Navigator to find information about platform and software image support. To access Cisco Feature Navigator, go to https://cfnng.cisco.com/ . Configuring Multi-VRF CE Feature History for Multi-VRF CE Release Feature Feature Information Cisco IOS XE Everest 16.5.1a Multi-VRF CE The switch supports multiple VPN routing/forwarding (multi-VRF) instances in customer edge (CE) devices (multi-VRF CE). Configuring Multi-VRF CE 24