4-3-2 Add Internal Devices In this section, how to add devices to an existing project is described. If you need communications between the CPU unit and NA, or need display/operation screens, other than this demo (e.g. designing an actual customer's equipment), the following procedure is recommended. 19 1. In the top window of Multiview Explorer, select NA. Note: If NA has been already selected, setting is not necessary. 2. Right-click NA icon. 3. Left-click [Add Device]. 4. Set the device as shown on the right and click [OK]. Select the unit's version in use for Version. Note: NX102, NX7, and NJ are also available. 5. The controller is added. Implement necessary settings.
Now you have added the safety CPU unit that you want to connect.