Ref :UM-CT7-11-001 Issue : 01 Date : 28/04/2011 Page 19 of 35 6.3.3 Info This operation will display general information about the instrument as it appears on the screen hereunder. The list provides following parameters: Actual CART # Number of measurements in the memory (since last CLEAR) Absolute counter of the measurements since assembly of the instrument Language selected 0=English Delay after Trigger before start of the actual measurements (in seconds) Delay before Automatic Sleep (in minutes) Flash addr – base address of data block in internal FLASH memory Serial number of the CT7 instrument (same as on the back of the housing) Flash Addr:
- The base address of block of memory actually used . The results, even for hundreds of measurement, are quite limited in volume: several kilobytes. CT7 changes periodically position of data block within its huge 2Gbytes flash data memory. This document is OPO property. It may not be either used or copied without authorization. OPO sprl, Crawhez 9, 4890 Thimister Clermont, Belgium. +32 87688989 - +32 87598990