Chapter3 Handling Resetting the Administrator Password If you forgot the password, reset the password following the procedure below. 1 Press the (Home) button to display the home screen. 2 Hold down the (back) button and (cancel) button at the same time. 3 When a confirmation message is displayed, select [Yes]. 4 Enter the password to unlock, and then select [OK] on the screen. The password to unlock depends on whether there is a password label applied to the rear of the printer. • If there is a password label Enter the value for "PASSWORD" on the password label. In the example shown, the initial password is 03212791. • If there is no password label Enter “1234”.
Even if there is a password label on the rear of the printer, it might not be possible to initialize the printer depending on the firmware version. In that case, enter “1234”. 5 When a message is displayed, press the OK button. 299