Chapter3 Handling Print Head Cleaning If nozzles are clogged, run a print head cleaning. Run [Power Cleaning] only when nozzle clog is not cleared by running [Print Head Cleaning]. To run a print head cleaning, select the menu as described below. c IMPORTANT • Do not turn off the power or open the covers during head cleaning. Doing so may cause printing malfunction. • Do not run the head cleaning more than necessary. Ink is consumed because ink is discharged from the head to clean it. • If there is not much ink remaining, head cleaning may not be possible. Replace the ink cartridges and then try again.
( "Replacing the Ink Cartridges (p45)" ) • The [Power Cleaning] consumes ink more than [Print Head Cleaning]. Using the Operation Panel [Menu] - [Maintenance] - [Print Head Cleaning] [Menu] - [Maintenance] - [Power Cleaning] Using the Printer Driver Click [Print Head Cleaning] or [Power Cleaning] on the [Printer Utilities] window. Using the Web Config Select [Print Head Cleaning] on the [Maintenance] window. Then select the cleaning type from [Auto] or [Power Cleaning], and then click [Start]. For details on Web Config, see "Web Config" on page 244 . 309