Chapter3 Handling 315 Message Solution Maintenance Error The Maintenance Box is at the end of its service life. You need to replace it. Model number: SJMB4000 Replace the maintenance box with a new one. ("Replacing the Maintenance Box" on page 48) Information Memory Full. Document was not printed. Contact your system administrator and delete unnecessary files. Printer Error Turn on the printer again. See your documentation for more details. XXXXXX 1. Turn off the printer. 2. Check that there is no paper jam or foreign materials near the ejection slot. 3. Turn the printer on. If the printer error still occurs, contact qualified service personnel for advice.
When contacting, tell the person the “XXXXXXXX” (a 6- or 8-digit alphanumeric code). Information Cannot start cleaning because ink is low. Printer features except cleaning are available. When running the cleaning, install ink cartridges with a sufficient amount of ink remaining. ("Replacing the Ink Cartridges" on page 45) Information Paused The print quality may decrease because the nozzles are clogged. The print quality may decrease because the nozzles are clogged. If it is not acceptable, run a print head cleaning. ("Cleaning the Print Head" on page 306)