Chapter3 Handling Enter the length of the label. • Continuous paper, Continuous label: Length of the print range (length of one page) Print range Print range Continuous paper Continuous label • Die-cut label: Label length excluding the backing paper • If the interval for cutting the paper is less than 15.0 mm (0.59 inches), auto cutting is not possible because a paper jam may occur. If you want to use auto cutting for labels less than 15.0 mm (0.59 inches), set the interval for cutting the paper to 15.0 mm (0.59 inches) or more in the settings for paper handling after print.
( "Settings For Paper Handling After Print" on page 83 ) • Select the check box for [Banner Printing] on the [Options] tab to specify a label length up to 3000.0 mm (118.11 inches). This [Banner Printing] function is a processing function within the driver that divides the specified label length into multiple pages each having a length that is within the maximum label length that the printer can handle (609 mm (23.98 inches)) and prints them with a gap of 0 mm (0 inches) between the labels, so that labels longer than 609 mm (23.98 inches) can be printed. Enter the gap between labels. Print range Print range Continuous paper Continuous label 79 3 Label length 4 Gap between labels