Chapter3 Handling Replace Settings from Printer using ZPL II Commands Click [Set...] for [Replace settings from printer using ZPL II commands] to open the setting window. When adjusting, make the adjustment checking actual printouts. Resolution Settings From the [Resolution of the printer in use] pull-down menu, select the resolution. If the same resolution is not found in the menus, select one of the closest resolution. For example, if the resolution of the ZPL II compatible monochrome printer you were using is 203 dpi, select 200 dpi.
Monochrome Print Mode Setting If you use the printer just as a replacement of your previous ZPL II compatible monochrome printer and do not perform color printing, select the check box. Vertical/Horizontal Positioning You can adjust the print position of objects such as text, image, or graphic. If you have set the same resolution as the resolution of the ZPL II compatible monochrome printer in the [Resolution of the printer in use] setting, set “0” (zero) to both the [Vertical positioning] and [Horizontal positioning].
If the resolution of the ZPL II compatible monochrome printer you were using is 203 dpi, and you have set the [Resolution of the printer in use] setting to [200 dpi], set “-1.5” to both the [Vertical positioning] and [Horizontal positioning]. 211