Chapter3 Handling 230 Setting menu Settings Default Lock Setting General Settings Printer Settings Media Settings Print Options Print Mode Cut - Stop at Cut - ✓ - Position Stop at Cut - - ✓ - Position Stop at Specified - - ✓ - Position Specified Stop 0-50.0 mm / 0 mm/ - ✓ - Position 0-1.97 in. 0 in. Cut Position −20.0 to 1.5 mm/ 0 mm/ - ✓ - −0.785 to 0.06 in. 0 in.
Reprint Enable Enable - ✓ - Disable - ✓ - Incomplete Label Cut Cut - ✓ - Treatment Never Cut - ✓ - Media Hold Pressure Setting Auto Auto - ✓ - Manual - ✓ - Media Hold 1 to 10 10 - ✓ - Pressure Head-Media 1 to 4 2 - ✓ - Clearance Height Cancel Action Job ONLY Job ONLY - ✓ - Job/RAM Drive - ✓ - External I/O Settings End print signal Disable Signal Disable Signal - ✓ - Low level Enable - ✓ - High level Enable - ✓ - Low Pulse Enable - ✓ - High Pulse Enable - ✓ - Print Mode Cut - Stop at Cut - ✓ - Position Stop at Cut - - ✓ - Position Stop at Specified - - ✓ - Position Cut - Stop at Cut Position - ✓ - Stop at Cut Position - - ✓ - Stop at Specified Position - - ✓ - Specified Stop Position 0-50.0 mm / 0-1.97 in.
0 mm/ 0 in. - ✓ - Cut Position −20.0 to 1.5 mm/ −0.785 to 0.06 in. 0 mm/ 0 in.
- ✓ - Reprint Enable Enable - ✓ - Disable - ✓ - Enable Enable - ✓ - Disable - ✓ - Incomplete Label Treatment Cut Cut - ✓ - Never Cut - ✓ - Media Hold Pressure Setting Auto Auto - ✓ - Manual - ✓ - Media Hold 1 to 10 10 - ✓ - Pressure Setting Auto Auto - ✓ - Manual - ✓ - Media Hold Pressure 1 to 10 10 - ✓ - Head-Media Clearance Height 1 to 4 2 - ✓ - Cancel Action Job ONLY Job ONLY - ✓ - Job/RAM Drive - ✓ - Job ONLY Job ONLY - ✓ - Job/RAM Drive - ✓ - External I/O Settings End print signal Disable Signal Disable Signal - ✓ - Low level Enable - ✓ - High level Enable - ✓ - Low Pulse Enable - ✓ - High Pulse Enable - ✓ - End print signal Disable Signal Disable Signal - ✓ - Low level Enable - ✓ - High level Enable - ✓ - Low Pulse Enable - ✓ - High Pulse Enable - ✓ -