Chapter3 Handling How to Start Web Config Start a web browser on a computer or device that is connected via a network, and then type the printer IP address into the browser. To change the printer settings, log in from [Administrator Login] on the upper right corner of the screen. Leave the User Name field blank. Enter the default administrator password, which is the value for “PASSWORD” on the password label affixed to the right side of the printer. In the example shown, the initial password is 03212791. Enable the JavaScript on the browser.
Because the communication with the printer uses a self-signed certificate of the printer over HTTPS, a warning message is displayed on the browser when you start Web Config. Communication over HTTPS IPv4: https://IP address of the printer IPv6: https://[IP address of the printer] Communication over HTTP IPv4: http://IP address of the printer IPv6: http://[IP address of the printer] Examples IPv4: https://192.0.2.111/ http://192.0.2.111/ IPv6: https://[2001:db8::1000:1]/ http://[2001:db8::1000:1]/ 241