Chapter2 Setup Self-Test Printing If you have already installed the printer driver, you can do a test print using the printer driver. Follow the procedure below to do the test print. 1 Open [Printers & scanners]. 2 Click the printer icon and click [Printer properties]. 3 The Printer properties screen appears. Click [Print Test Page] on the screen. If the [Media Detect] setting has been set to [Gap] or [Hole], the test page is not printed from the first label. However, you can change to print from the first label if you do the settings described in the link below. U "Printing from the First Label" on page 289 80