Chapter3 Handling Enter the length. • Continuous paper, full-page label, or tag: Length of the print range (length of one page) Print area Print area Print area Continuous paper Full-page label Tag • Die-cut label: Label length excluding backing paper Enter the gap between labels. Print area Print area Print area c IMPORTANT • It is recommended to set the [Left and Right Gap] to at least 2 mm {0.08 in.}. Setting it to less than 2 mm {0.08 in.} may cause ink to adhere to the inside of the printer and stain printed paper. • Regarding the waste part on the left and right of the label • Can be set in the range of 0 to 6 mm {0 to 0.24 in.}.
(Basically, 2 mm {0.08 in.}) • If the size is larger than 2 mm {0.08 in.}, paper jams or other problems may occur. 94 3 Length 4 Gap Between Labels Continuous paper Full 5 Media Form Select the form of the paper. • Die-cut label • Full-page label • Continuous paper • Tag 6 Left and Right Gap (for die-cut label, ful The left and right gaps are always the same. Th -page label Tag 5 Media Form • Full-page label • Continuous paper • Tag 6 Left and Right Gap (for die-cut label, ful l-page label, and continuous paper) The left and right gaps are always the same . Th