Chapter 2 Setup 3 Turn the printer over. 4 When installing the AC adapter to the base of TM-J7700, see the "TM-J7200/TM- J7700 Technical Reference Guide" for procedures and notes regarding installation. When installing a customer display to the AC adapter side, do not use the power source fixing plate and screws included with TM-J7700. A customer display is secured by using fixing plate A of DP-502 and the included screws. For this reason, do not install the power source fixing plate or attach the screws. 5 Use two screws to secure fixing plate A to the printer.
When installing a customer display to the TM-J7700 AC adapter side, place fixing plate A on top of the AC adapter and secure by using the screws included with DP- 502. Do not use the screws that came with DP-502 for the holes for the screws that came with TM- J7700. The holes may be widened and screws may not be secured as the specifications of the screws are different. 2 61