Chapter 2 Setup Connecting This section explains how to connect to the system by connection patterns. The illustrations used here are for DM-D110/DP-110, but you can still use them as your reference for DM- D210/DP-210. When attaching or removing the cables, make sure you turn off the power to the customer dis- play and the system. CAUTION • When connecting or removing the AC adapter to the DC cable connector, make sure that the 2 DM-D110/DM-D210 Ferrite core RS-232 cable USB cable AC adapter Computer Power cord DP-110/DP-210 74 AC adapter’s power cord is unplugged from the outlet. • When connecting or removing the DC cable of the AC adapter, make sure you hold the con- nector part.
If you pull the cable part, you may damage the cable. USB (Self Powered) • DM-D110 • DM-D210 USB cable • Remove the cap • Attach the ferrite core • Connect to the computer RS-232 cable • Remove the cap • Connect to the DM-D connector of DP-110/DP-210 • DP-110 • DP-210 DM-D connector Connect the RS-232 cable of DM-D110/DM-D210 Power supply connector Connect the AC adapter Extension power cable connector Not used Computer interface connector Not used Printer interface connector Not used JP1 Not setting JP2 Not setting