Using Windows 95 Installing HP/3Com 10/100 Ethernet+ 56K Global Modem Mini-PCI Card Support Installing HP/3Com 10/100 Ethernet+ 56K Global Modem Mini-PCI Card Support This section describes how to: • Install Ethernet support. • Install modem support. To install Ethernet support If you have installed Windows 95 and your HP Notebook contains a built-in 3Com 10/100 Mini PCI Ethernet Adapter, you need to install the LAN drivers. The LAN drivers are contained in the \HP\DRIVERS\W95\LAN subdirectory. 1. Make sure that the 3Com network adapter is connected to the network. 2. Open the Device Manager: Right-click on My Computer and select Properties, and then click the Device Manager tab. 3.
Remove “PCI Ethernet driver” in “Other Devices.” 4. Restart the computer. Windows will detect the PCI Ethernet Controller. 5. Click Next. 6. Click Other Locations. 7. Enter the directory of the driver on the CD at \HP\Drivers\95\LAN. Note: Type in the directory name do not browse to it. A Windows 95 error may occur if you browse. 8. Click OK. 9. Click Finish. 10. Click OK. 11. Enter the directory of the driver on the CD at \HP\Drivers\95\LAN. Note: Type in the directory name do not browse to it. A Windows 95 error may occur if you browse. 12. Click OK. 13. Click OK. Corporate Evaluator’s Guide 129