Downloaded from https://www.everyspec.com MIL-STD-2031 (SH) 53 Retest requirements. Once a composite material system has been certified by NAVSEA any change to the minimum material characteristics, as defined by the specimen requirements, shall he retested by the supplier for recertification by NAVSFA. The extent to which incremental tests are required will be determined by NAVSEA. 5.4 Test facilities. The contractor shall notify NAVSEA where the tests specified will be conducted. Except as otherwise directed, contractors may use their laboratories or other laboratories to perform the tests. 6.
NOTES (This seetion contains information of a general or explanatory nature that maybe helpful, but is not mandatory.) 6.1 Intended use. The test methods and qualification procedures provided in this standard are intended to ensure that all information needed by Naval Sea Systems Command to eerti~ a composite material system to be used aboard Naval submarines is developed. 6.2 Implementation guidance. When this standard is invoked, the following should be speeifkd: a. Title, number, and date of this standard b.
Issue of DODISS to be cited in the solicitation, and if require~ the speeif5c issue of Wual doeuzneats refercnuxi (see 21) c When fire characteristics and test methods are other than as speeikd (see 4.1) d. When test responsibility is other than as specified (see 5.1). 6S Consldemtion of data requirements. The fobwing data requirements should be considered when this standard is applied on a contract. The applicable Data Item Descriptions (DID’s) should be reviewed in conjunction with the specific acquisition to ensure that only essential data are requestdprovided and that the DID’s are tailored to reflect the requirements of the spedlc acquisition.
To ensure correct contractual application of the data requirements, a @ntraet Data Requirements List (DD Form 1423) must be prepared to obtain the data, except where DOD FAR Supplement 27.475-1 exempts the requirement for DD Form 1423. Reference Paragraph DID Number DID Title Suggested Tailoring 4.1 and Appendix G D1-MISC-806S3 Test reports The above DID’s were those cleared as of the date of this specification. The current issue of DOD 5010.12-~ Acquisition Management Systems and Data Requirements Clmtrol List (AMSDL), must be researchtxi to ensure that only curren4 cleared DID’s are cited on the DD Form 1423.