Downloaded from https://www.everyspec.com ADS-79D-HDBK APPENDIX M OIL CONDITION AND DEBRIS MONITORING M.1 PURPOSE AND SCOPE The purpose of this Appendix is to provide methodology and guidance to implement oil debris and oil condition capabilities for the detection, identification and characterization of faults in oil-wetted aircraft components where oil monitoring is deemed an appropriate risk mitigation strategy. This Appendix covers the use of oil sampling, on-line oil debris sensors and at-line test equipment for oil condition and debris monitoring.
Component usage monitoring, limits and trending, diagnostics and prognostic algorithms, and methodology verification and validation are also included. Furthermore it recommends the minimum technical requirements for utilizing oil debris and condition systems for condition based maintenance. Condition based health monitoring on greased and hydraulic components are not specifically addressed in this Appendix but may be added at a later date. M.2 REFERENCES AND APPLICABLE DOCUMENTS M.2.1 Standards:
(Copies of this document are available at http://www.redstone.army.mil/amrdec/rdmr- se/tdmd/StandardAero.htm ) (Copies of this document are available from https://acc.dau.mil/cbm-guidebook or Defense Acquisition University, DAU-GLTC, 9820 Belvoir Road, Ft.
Belvoir, VA 22060-5565) (Copies of these documents are available online at http://www.apd.army.mil/ ) 233 US ARMY AERONAUTICAL DESIGN STANDARD ADS-50-PRF Rotorcraft Propulsion Performance and Qualification Requirements and Guidelines, 1996 DEFENSE ACQUISITION UNIVERSITY (DAU) AMC-R11-47 Army Oil Analysis Program (AOAP) 19 June 2006 ARMY REGULATIONS AR 700-132 Joint Oil Analysis Program 28 Aug 2008 (RAR 31 May 2010) AR 750-1 Army Materiel Maintenance Policy 10 Apr 2007 (RAR 11 Oct 2007) Army Pamphlet 750-8 The Army Maintenance Management System (TAMMS) User Manual, 22 Aug 2005 (Rev 14 Sep 2011)