Basic Scanning > Scanning from a Computer > Scanning Using Epson Scan 2 Related Information & “Application for Controlling the Scanner (Epson Scan 2)” on page 25 & “Placing Originals” on page 36 & “Setting a Resolution That Suits the Scanning Purpose” on page 88 & “Setting the Document Protection Feature” on page 140 & “Setting the Glass Surface Stain Detection Feature” on page 139 & “Setting the Operation When a Double-Feed is Detected” on page 141 Required Settings for Special Originals in Epson Scan 2 Window You need to set certain items on the Main Settings tab in Epson Scan 2 window when scanning special originals.
When you are using Document Capture Pro, you can open the window by pressing the Detailed Settings button on the Scan Settings screen. Related Information & “Placing Originals” on page 36 87 Type of Original Required Settings Envelopes Select Off in Detect Double Feed. Plastic cards Select Plastic Card on the Document Size list, or select Of fin Detect Double Feed. Carrier Sheet ❏ If you select Auto Detect from the Document Size list, paper skew in the original is automatically corrected even if you select Of fin Correct Document Skew. ❏ If you select a other size than Auto Detect from the Document Size list, you can only use Contents Skew when using Correct Document Skew.
Paper Skew is not applied when this is selected. When you select Paper and Contents Skew, only contents skew is corrected. Large size originals If the size of the original you want to scan is not on the Document Size list, select Customize to open the Document Size Settings window. Next, create the size manually on the window. Long paper If the size is not listed on the Document Size list, select Auto Detect (Long Paper) or select Customize to create a custom document size. Laminated cards To scan transparent areas around the edges, select Customize on the Document Size list to open the Document Size Settings window. Next, select Scan laminated card in the window. Note:
Teh appropriate efef ct may not be achieved depending on the original. If transparent areas around the edges are not scanned, select Customize from the Document Size list, and then create the size manually.